Skip to main content
Drinking fountains

KEMWSM8SBF-STN Chilled filler, push

213.0653.609

Chilled sports bottle filler. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Unit will comply with wheelchair accessibility when properly installed. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Included tailpiece is sized to accept either 1 1/2 inch (38 mm) or 1 1/4 inch (32 mm) P-trap (not included). Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, easily accessible by removal of front panel. R134a refrigerant. Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of 0.25% or less). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 8 gph chiller, surface mount, mechanically activated push button. Optional filter kit F041253-001. 5 5/16 x 20 1/4 x 41 1/4" Overall (FB x LR x H). 135 x 515 x 1048 mm Overall (FB x LR x H).

Product Information

Features

Cabinet finish Brushed stainless
Type of operation Manual
Drinking bubbler No
Bottle filler included Yes

Product Dimensions

Overall front to back 5.315 "
Overall left to right 20.276 "
Overall height 41.26 "

Installation

Wall mounting type Surface

Product identification

Model KEMWSM8SBF-STN
Product brand FRANKE
Product category Drinking fountains
Drinking fountain type Bottle fillers

Product specifications

Outlet size DN32 / 1 1/4"
Inlet size DN10 / 3/8"
Wheelchair accessibility Yes
Certification UL
Certification NSF
Certification CSA

Downloads

Product Sheet PDF