Skip to main content
Drinking fountains

KEMW8EBF-STN Chilled recessed filler

213.0653.611

Chilled sports bottle filler. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Unit will comply with wheelchair accessibility when properly installed. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Included tailpiece is sized to accept either 1 1/2 inch (38 mm) or 1 1/4 inch (32 mm) P-trap (not included). Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, easily accessible by removal of front panel. R134a refrigerant. Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of 0.25% or less). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 8 gph chiller, surface mount, sensor activated bottle filler with bottle counter. Optional filter kit: F041253-001. 1 5/16 x 19 3/4 x 40 3/4" Overall (FB x LR x H). 33 x 502 x 1035 mm Overall (FB x LR x H).

Product Information

Features

Cabinet finish Brushed stainless
Chilled Yes
Type of operation Sensor
Drinking bubbler No
Bottle filler included Yes

Product Dimensions

Overall front to back 1.299 "
Overall left to right 19.764 "
Overall height 40.748 "

Installation

Wall mounting type Recessed

Product identification

Model KEMW8EBF-STN
Product brand FRANKE
Product category Drinking fountains
Drinking fountain type Bottle fillers

Product specifications

Cooling capacity 8 gph
Outlet size DN32 / 1 1/4"
Inlet size DN10 / 3/8"
Input supply voltage Hz 60 Hz
Input supply voltage V 115 V
Motor power 500 W
Wheelchair accessibility Yes
Certification UL
Certification NSF
Certification CSA

Downloads

Product Sheet PDF