Skip to main content
Drinking fountains

KEMWSM8EBF-STN Chilled filler, sensor

213.0653.607

Chilled sports bottle filler. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Unit will comply with wheelchair accessibility when properly installed.Deep alcove to accommodate for larger diameter containers even if they have a small neck. Included tailpiece is sized to accept either 1 1/2 inch (38 mm) or 1 1/4 inch (32 mm) P-trap (not included). Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, easily accessible by removal of front panel. R134a refrigerant. Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of 0.25% or less). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 8 gph chiller, surface mount, sensor activated bottle filler with bottle counter. Optional filter kit F041253-001. 5 5/16 x 20 1/4 x 41 1/4" Overall (FB x LR x H). 135 x 515 x 1048 mm Overall (FB x LR x H).

Product Information

Features

Cabinet finish Brushed stainless
Chilled Yes
Type of operation Sensor
Drinking bubbler No
Bottle filler included Yes

Product Dimensions

Overall front to back 5.315 "
Overall left to right 20.276 "
Overall height 41.26 "

Installation

Wall mounting type Surface

Product identification

Model KEMWSM8EBF-STN
Product brand FRANKE
Product category Drinking fountains
Drinking fountain type Bottle fillers

Product specifications

Outlet size DN32 / 1 1/4"
Inlet size DN10 / 3/8"
Input supply voltage Hz 60 Hz
Input supply voltage V 115 V
Wheelchair accessibility Yes
Certification UL
Certification NSF
Certification CSA

Downloads

Spec Sheet PDF