Skip to main content
Drinking fountains

KEP8ACSL-EBQ-GRY Chilled fountain Quasar

213.0670.099

Combination chilled split level drinking fountain with sports bottle filler. QUASAR bottle filler shall have UVC-LED treatment at the dispense point, which disinfects the water while it is being dispensed. UVC-LED also cycles on periodically to keep the dispense point sanitized between dispenses. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Sports bottle filler cabinet finish is brushed stainless steel. Waterways are lead-free in materials and construction. Drinking fountains are mechanically activated. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed. Manual fountain activation. Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, easily accessible by removal of front panel. R134a refrigerant. Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of 0.25% or less). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 8 gph chiller, greystone finish, sensor activated sports bottle filler with bottle counter. Optional filter kit F041253-001. 18 9/16 x 36 1/8 x 37 13/16" Overall (FB x LR x H). 472 x 917 x 960 mm Overall (FB x LR x H).

Product Information

Features

Cabinet finish Greystone
Chilled Yes
Type of operation Sensor
Drinking bubbler Yes
Bottle filler included Yes
Bottle filler UVC disinfection UVC LED disinfection

Product Dimensions

Overall front to back 18.583 "
Overall left to right 36.102 "
Overall height 37.795 "

Installation

Wall mounting type Wall mounting
Recommended wall carrier IWC2203

Product identification

Model KEP8ACSL-EBQ-GRY
Product brand FRANKE
Product category Drinking fountains
Drinking fountain type Quasar UVC Bottle Fillers

Product specifications

Cooling capacity 8 gph
Outlet size DN32 / 1 1/4"
Inlet size DN10 / 3/8"
Input supply voltage Hz 60 Hz
Input supply voltage V 115 V
Motor power 500 W
Wheelchair accessibility Yes
Certification UL
Certification NSF
Certification CSA

Downloads

Spec Sheet PDF