Skip to main content
Healthcare

HWS1420P-00 Clinical Wash Trough,18ga

214.0493.253

Z8000 Compliant Antimicrobial Hand Hygiene Sink. 18 gauge (1.2 mm) type 304 stainless steel. Left rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. This hand hygiene sink is wider to permit forearm washing for light procedures as well as for mounting of paper towel and soap dispensers within the splash guard. Due to the large size of the backsplash, an additional rear wall splash guard is not required to comply with the Z8000 guidelines. Recommended for laminar flow, user temperature controlled deck mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with silver ion product protection. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending. HWS1420P-00-1, 1 hole, 1 1/2" diameter. on ledge, for deckmount faucet.HWS1420P-00-3, 3 hole, 1 1/2" diameter, 4" centre spread on ledge, for deckmount faucet. HWS1420P-00, Custom, non-returnable. 19 3/16 x 21" Overall. 14 x 20 x 10" Bowl. (FB x LR x D). 487 x 533 mm Overall. 356 x 508 x 254 mm Bowl. (FB x LR x D).

Product Information

Features

Waste assembly Integral
Waste fitting Welded

Product Dimensions

Overall front to back 19.173 "
Overall left to right 20.984 "
Overall height 37.953 "
Bowl dimension front to back 14.016 "
Bowl dimension left to right 20 "
Bowl depth 10 "

Installation

Installation type Wallmounted
Installation system Wall hanger bracket

Product identification

Model HWS1420P-00
Product brand FRANKE
Product category Healthcare
Healthcare category Clinical wash basins

Product specifications

Gauge 18
Waste location Left rear
Waste size 1 1/2" (38mm)
Type of material Type 304
Certification cUPC
Material code CNS 18/10
Surface finish #4 Satin
Surface treatment Antimicrobial nanocoating
Number of bowls 1
Splash location Back and sides
Faucet ledge position Yes
Number of faucet holes Specify when ordering
Tailpiece diameter (in) 1 1/2" (38mm)

Downloads

Spec Sheet PDF

Installation Manual 214.0493.253 001 PDF (214 KB)